TrustSeal Verified
IndiaMART Verified Exporter IndiaMART Verified Exporter

Compression Moulding Machines

1500 x 1250 mm Downstroking Compression Moulding Machine, 400 Tons

Rs 8,50,000 / Piece

1500 x 1250 mm Downstroking Compression Moulding Machine, 400 Tons
  • Capacity: 400 Tons
  • Platen Size: 1500 x 1250 mm
  • Machine Type: H-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1050 mm
  • Bore Diameter: 510 mm
  • Minimum Order Quantity: 1 Piece
  • Capacity: 400 Tons
  • Platen Size: 1500 x 1250 mm
  • Machine Type: H-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1050 mm
  • Bore Diameter: 510 mm
  • Motor Power: 30 HP
  • Working Pressure: 200 Bar
  • Weight: 20 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 450 mm
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

500 x 500 mm Downstroking Compression Moulding Machine, 60 Tons

Rs 7,00,000 / Piece

500 x 500 mm Downstroking Compression Moulding Machine, 60 Tons
  • Capacity: 60 Tons
  • Platen Size: 500 x 500 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 400 mm
  • Bore Diameter: 200 mm
  • Minimum Order Quantity: 1 Piece
  • Capacity: 60 Tons
  • Platen Size: 500 x 500 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 400 mm
  • Bore Diameter: 200 mm
  • Motor Power: 5 HP
  • Working Pressure: 200 Bar
  • Weight: 4 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 250 mm
  • Port of Dispatch: All Over World
  • Delivery Time: Ready Stock
  • Packaging Details: Polythene and Wooden Packing
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

750 x 750 mm Downstroking Compression Moulding Machine, 150 Tons

Rs 6,00,000 / Piece

750 x 750 mm Downstroking Compression Moulding Machine, 150 Tons
  • Capacity: 150 Tons
  • Platen Size: 750 x 750 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 450 mm
  • Bore Diameter: 300 mm
  • Capacity: 150 Tons
  • Platen Size: 750 x 750 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 450 mm
  • Bore Diameter: 300 mm
  • Motor Power: 10 HP
  • Working Pressure: 200 Bar
  • Weight: 7-8 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 350 mm
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

1000 x 900 mm Downstroking Compression Moulding Machine, 200 Tons

Rs 6,50,000 / Piece

1000 x 900 mm Downstroking Compression Moulding Machine, 200 Tons
  • Capacity: 200 Tons
  • Platen Size: 1000 x 900 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 500 mm
  • Bore Diameter: 350 mm
  • Minimum Order Quantity: 1 Piece
  • Capacity: 200 Tons
  • Platen Size: 1000 x 900 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 500 mm
  • Bore Diameter: 350 mm
  • Motor Power: 10 HP
  • Working Pressure: 200 Bar
  • Weight: 9-10 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 350 mm
  • Port of Dispatch: All Over World
  • Delivery Time: Ready Stock
  • Packaging Details: Polythene and Wooden Packing
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

2000 x 1600 mm Downstroking Compression Moulding Machine, 1000 Tons

Rs 15,00,000 / Piece

2000 x 1600 mm Downstroking Compression Moulding Machine, 1000 Tons
  • Capacity: 1000 Tons
  • Platen Size: 2000 x 1600 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1400 mm
  • Bore Diameter: 565 mm
  • Minimum Order Quantity: 1 Piece
  • Capacity: 1000 Tons
  • Platen Size: 2000 x 1600 mm
  • Machine Type: 4-Pillar Type
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1400 mm
  • Bore Diameter: 565 mm
  • Motor Power: 75 HP
  • Working Pressure: 200 Bar
  • Weight: 50 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 600 mm
  • Delivery Time: 2 to 3 Months
  • Packaging Details: Polythene Packed
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

1000 x 1000 mm Downstroking Compression Moulding Machine, 250 Tons

Rs 7,00,000 / Piece

1000 x 1000 mm Downstroking Compression Moulding Machine, 250 Tons
  • Capacity: 250 Tons
  • Platen Size: 1000 x 1000 mm
  • Machine Type: C-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 600 mm
  • Bore Diameter: 400 mm
  • Capacity: 250 Tons
  • Platen Size: 1000 x 1000 mm
  • Machine Type: C-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 600 mm
  • Bore Diameter: 400 mm
  • Motor Power: 15 HP
  • Working Pressure: 200 Bar
  • Weight: 12-13 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 350 mm
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

1250 x 1250 mm Downstroking Compression Moulding Machine, 300 Tons

Rs 7,50,000 / Piece

1250 x 1250 mm Downstroking Compression Moulding Machine, 300 Tons
  • Capacity: 300 Tons
  • Platen Size: 1250 x 1250 mm
  • Machine Type: H-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 850 mm
  • Bore Diameter: 440 mm
  • Minimum Order Quantity: 1 Piece
  • Capacity: 300 Tons
  • Platen Size: 1250 x 1250 mm
  • Machine Type: H-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 850 mm
  • Bore Diameter: 440 mm
  • Motor Power: 20 HP
  • Working Pressure: 200 Bar
  • Weight: 15-16 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 400 mm
  • Port of Dispatch: All Over World
  • Packaging Details: Polythene and Wooden Packing
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

Lab Compression Moulding Presses

Rs 4,50,000 / Ton

Lab Compression Moulding Presses
  • Capacity: 10-20Ton
  • Machine Type: Automatic
  • Brand: Santec
  • Automation Grade: Automatic
  • Material: Caste iron
  • Minimum Order Quantity: 1 Ton
  • Capacity: 10-20Ton
  • Machine Type: Automatic
  • Brand: Santec
  • Automation Grade: Automatic
  • Material: Caste iron
  • Port of Dispatch: All Over World
  • Port of Dispatch: All Over World
  • Delivery Time: Ready Stock
  • Packaging Details: Polythene and Wooden Packing
Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development. These compact presses are engineered to provide vibration free operation with low noise and requires minimum maintenance.
know more

3000 x 2500 mm Downstroking Compression Moulding Machine, 3000 Tons

Rs 60,00,000 / Piece

3000 x 2500 mm Downstroking Compression Moulding Machine, 3000 Tons
  • Capacity: 3000 Tons
  • Platen Size: 3000 x 2500 mm
  • Machine Type: C-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1500 mm
  • Bore Diameter: 565 mm
  • Capacity: 3000 Tons
  • Platen Size: 3000 x 2500 mm
  • Machine Type: C-Type Frame
  • Heating of Platens: Electrical Heater
  • Stroke Length: 1500 mm
  • Bore Diameter: 565 mm
  • Motor Power: 125-150 HP
  • Working Pressure: 200 Bar
  • Weight: 100-110 Tons
  • Condition: New
  • Country of Origin: Made in India
  • Shut Height: 1000 mm
  • Port of Dispatch: All Over World
  • Delivery Time: Ready Stock
  • Packaging Details: Polythene and Wooden Packing
''SANTEC'' has with it leadership status in field of SMC/DMC/FRP Melamine Moulding Presses. Well recognized for their superior engineering standards, these high speed presses deliver high degree of precision in given applications. Further, these are also safe to operate. With slide moving with 8– Point Gibs with lubrication arrangement, the special design of square gibs provides accurate guiding of moving platen/slide. Further, thee also have extra stability for resisting any deflection under different load conditions.

Downstroking SMC/DMC/FRP Compression Moulding Presses offered by us are known for their precision fabricated ultrasonically tested steel construction based frames. These are constructed using prime steel plate of optimum thickness so as to ensure superior strength and rigidity. Some of the other standard features of these precision designed hydraulic machines include:
  • Accurate slide guiding arrangement
    • Different range of guiding arrangements provided for suiting application of press
    • Long guiding length and suitable guide featuring centralized lubrication system provided in presses
  • Bottom Cushioning Arrangement
    • These draw cushions are designed to hold blank during deep drawing operations with the cushion preventing formation of wrinkles
    • As result of ejection function, it raises parts to transport level/ejection level during return motion of slide
    • Cushion designed for about 30% of main Ram tonnage when in cushion mode
  • Stroke Limiters & Damping device
    • Mechanical stoppers provided as safety features for limiting maximum stroke of main Ram after pressing
    • Mechanical stoppers also help in protecting tools from damages
  • Most Reliable Hydraulic Drive System
    • Featuring reliable operations based hydraulic drive systems that involve compact manifold block for avoiding piping, ensuring less chance of leakages in system
    • These also ensure pressure remain constant throughout cycle
  • Control System
    • Press controls precision designed into panel mounted at type level on press
    • TFT Flat panel with touch screen as well as key pad comprising world renowned "Allen-Bradley" make to provide to the requirements of graphical display of control information, cushioning & ejection operations and indication of activation status of slide
  • Operator''s Safety Systems
    • Two hand push buttons operation facility to engage operators hand
    • Photo-electric safety guards
    • Hydraulic/mechanical operated moving protected guards can be optionally provided at front and back sides
    • Hydraulic locking of main slide and blank holder at top dead centre (TDC) for ensuring safety when operator is working in tooling area/under moving Ram
    • Electronic safety inter locking arrangement provided so as to ensure proper sequencing of operations
  • Accurate Slide Parallelism arrangement
    • Slide position sensor provided for detecting deviation
    • Servo valve for increasing pressures on underside of piston
    • Servo valve also help in decreasing the pressures on other connecting pipe
    • Maximum deviation measured at parallel control cylinders between 0.6 & 0.8 mm during operations like bending, drawing, SMC moulding and other forming operations

Applications:
  • SMC / DMC / FRP Moulded Parts
  • Melamine Moulded Parts i.e. Electrical connectors
  • Bakelite Moulding
  • Composite material / others polymers moulding
  • Brake linings / Clutch Facing / Rubber Parts Moulding
  • Switch gears Moulding

Note: Price will be change as per Customer Requirement
know more

Double Station Compression Molding Press

Rs 6,50,000 / Ton

Double Station Compression Molding Press
  • Capacity: 225 Tons
  • Machine Type: Manual, Automatic, Semi-Automatic
  • Brand: Santec
  • Surface treatment: Painted
  • Material: Automatic
  • Stroke: 225 mm
  • Minimum Order Quantity: 1 Ton
  • Capacity: 225 Tons
  • Machine Type: Manual, Automatic, Semi-Automatic
  • Brand: Santec
  • Surface treatment: Painted
  • Material: Automatic
  • Stroke: 225 mm
  • Platen size : 510 mm (L) x 410 mm (W)
  • Total heating load : 24 KW
  • Voltage: 380 V
  • Motor power: 7.5 H.P
  • Approx weight : 9 to 10 tons
  • Port of Dispatch: All Over World
  • Delivery Time: 2 Months
  • Packaging Details: Polythene and Wooden Packing
We are leading manufacturer of Double Station Compression Molding Press and our product is made of good quality.
know more

Explore More Categories

x

Send us a Quick Message

country flag
x

Provide Us More Details

Purpose of Requirement:

Reselling End Use Raw Material

We recommend you to enter details of your requirement to get quick quotations.
Back
company logo

Santec Exim Pvt. Ltd.