Melamine Moulding Presses
Approx. Rs 5 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Brand: Santec
- Special Frame: Fully Automatic Hydraulic presses with UREA/ Melamine Powder Feeding Arrangement
- Material: Cast iron
- Surface treatment: Painted
- Frame Design : H type , 4- Pillars Type, Closed Frame Type,Ring Frame Type
Today 'SANTEC' holds a consolidated leadership in the field of SMC/DMC/FRP Melamine Moulding Presses. SANTEC synonymous with “Better – Engineering” Now introduces these high speed presses which operate with high degree of precision & extremely safe to operate. The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models & pillars type presses are also manufactured depending on customer's requirements.
Note: Price will be change as per Customer Requirement
Double Compression Scrap Baler
Approx. Rs 5.4 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Automatic Grade: Automatic
- Material: Cast iron
- Surface treatment: Painted
- Brand: Santec
Scrap balers are used for reducing the scrap materials in two dimensions by using hydraulic force from two different angles. The bale density is slightly less than triple compression baler. The balers has one cylinder fixed in horizontal position. Vertical reduction usually take place by hydraulic pressure on the lid cylinder. The horizontal cylinder presses the scrap against the ejection door of the baler. This door can be raised or opened hydraulically after the process of baling is complete. The scrap bundle is then removed from the chamber by horizontal cylinder.
Downstroking SMC/DMC/FRP Compression Moulding Presses
Approx. Rs 15 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Voltage: 415 Volt
- Automation Grade: Automatic
- Control Type: PLC Controlled
- Phase: 3 Phase
- Country of Origin: Made in India
- Material: Cast iron
- Brand: Santec
- Surface treatment: Painted
Today 'SANTEC' holds a consolidated leadership in the field of SMC/DMC/FRP Melamine Moulding Presses. SANTEC synonymous with “Better – Engineering” Now introduces these high speed presses which operate with high degree of precision extremely safe to operate. The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models pillars type presses are also manufactured depending on customer's requirements.
Additional Information:- Delivery Time: 2 to 3 Months
- Packaging Details: Polythene Packed
Double Station Compression Molding Press
Approx. Rs 6.5 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Capacity: 225 Tons
- Machine Type: Automatic, Manual, Semi-Automatic
- Brand: Santec
- Surface treatment: Painted
- Material: Automatic
- Stroke: 225 mm
- Platen size : 510 mm (L) x 410 mm (W)
- Total heating load : 24 KW
- Voltage: 380 V
- Motor power: 7.5 H.P
- Approx weight : 9 to 10 tons
We are leading manufacturer of
Double Station Compression Molding Press and our product is made of good quality.
Additional Information:- Port of Dispatch: All Over World
- Delivery Time: 2 Months
- Packaging Details: Polythene and Wooden Packing
Hydraulic Laboratory Compression Moulding Press
Approx. Rs 6 Lakh / Unit
- Minimum Order Quantity: 1 Unit
- Capacity: 1000 Ton
- Machine Type: Automatic
- Brand: Santec
- Platen size: 650 x 550 mm
- Surface treatment: Painted
We are leading manufacturer of Hydraulic Laboratory Compression Moulding Press and our product is made of good quality.
Additional Information:- Port of Dispatch: All Over World
- Delivery Time: 2 Months
- Packaging Details: Polythene and Wooden Packing
Lab Compression Moulding Presses
Approx. Rs 4.5 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Capacity: 10-20Ton
- Machine Type: Automatic
- Brand: Santec
- Automation Grade: Automatic
- Material: Caste iron
Santec presents a full range of compression molding presses from small lab and prototype units to fully-automated or multi-station systems. The advanced configuration of laboratory presses incorporate latest features required to test the various materials for Research & Development. These compact presses are engineered to provide vibration free operation with low noise and requires minimum maintenance.
Additional Information:- Port of Dispatch: All Over World
- Delivery Time: Ready Stock
- Packaging Details: Polythene and Wooden Packing
Upstroking Compression Moulding Press
Approx. Rs 4.5 Lakh / Ton
- Machine Type: Automatic
- Brand: Santec
- Material: Cast iron
- Surface treatment: Painted
Today 'SANTEC' Compression Moulding Presses are preferred by leading Industries across the globe be cause of unmatched features, high quality, heavy duty construction & performance of these Presses. 'SANTEC' manufacture these Presses with an uncompromising Quality attitude & providing outstanding services world wide. SANTEC Engineer's are Competent enough to accommodate customer's suggestions & design the presses meeting all requirements as per International standards. In these presses, the Ram / slide / moving platen moves in upward direction (from Bottom Home Position to upward position). We have standard models & make these presses as per customer's specifications & requirement too.
Compression Molding Presses
Approx. Rs 6.5 Lakh / Unit
- Minimum Order Quantity: 1 Unit
- Brand: Santec
- Machine Type: Automatic, Semi-Automatic, Manual
- Surface treatment: Painted
- Material: Cast iron
Features- The low noise hydraulic power pack unit is designed as per international practices & assembled with internationally accepted make valves & other components. The presses are designed as per ISI guidelines, hence standard seals in heavy duty cylinders, bronze- bushes with lubrication arrangement are used.
- The precisely honed carbon steel seamless tubes are assembled with hardchrome plated piston rod, EN-9 & international quality sealing elements, imported from korea & Japan.
- Manifold block mounted valves minimising piping, hence no leakage & easy replacement & maintenance.
- With the help of PLC no. of breathings, breathing duration even in milli-seconds, curing time, temp. of platens, temp. variation range, desired pressure etc. may be programmed in the PLC.
- During curing period, the electric motor stop & if pressure drops below certain value, it automatically starts & maintain the pressure hence less strain to the hydraulic system, saves electricity, less noise, pollution, improves product quality
- Soft opening of moulds is provided just after the curing period for the safety of the moulded parts
- Ultrasonically tested quality plates are used of heavy thickness to make the frame more regid & capable enough to the load during frequent & fast operations
- All platens are having parallel accuracy , as platens are precisely grinded upto 0.01 to 0.02 mm parallel accuracy, with T-slots/ tapped holes & provision of heating & cooling arrangement as per DIN standards.
- Precise machining of the structural members is done after normalising to get the parallelism between platen & bed and right angularity between bed & the moving platen.
Price will be different according to Customer Requirement
Additional Information:- Port of Dispatch: All Over World
- Delivery Time: Read Stock
- Packaging Details: Polythene and Wooden Packing
Upstroking Type Compression Moulding Presses
Approx. Rs 7.5 Lakh / Unit
- Minimum Order Quantity: 1 Unit
- Machine Type: Semi-Automatic, Manual, Automatic
- Brand: Santec
- Material: Cast iron
- Surface treatment: Painted
Today 'SANTEC' Compression Moulding Presses are preferred by leading Industries across the globe be cause of unmatched features, high quality, heavy duty construction & performance of these Presses. 'SANTEC' manufacture these Presses with an uncompromising Quality attitude & providing outstanding services world wide. SANTEC Engineer's are Competent enough to accommodate customer's suggestions & design the presses meeting all requirements as per International standards. In these presses, the Ram / slide / moving platen moves in upward direction (from Bottom Home Position to upward position). We have standard models & make these presses as per customer's specifications & requirement too.
Upstroking Type Compression Moulding Presses from Santec are designed as per international standards. These presses can also be tailor made as per client's specific application requirements. They can be used for different application across diverse industries such as :
- Rubber products for automobiles, medical equipments etc.
- Melamine Crocking Moulding
- Composite materials mouldings i.e. Bullet proof Jackets, Helmets, etc.
- Laboratory applications
- Plastic sheets etc.
- Ply boad, MDF sheets, Particle Boards
- Conveyor Belts / V-Belts, Rubber mats / Flaps/ Tyres / tubes etc.
Price will be different according to Customer Requirement
Additional Information:- Port of Dispatch: All Over World
- Packaging Details: Polythene and Wooden Packing
Downstroking SMC/DMC/FRP Compression Moulding Presses
Approx. Rs 6.5 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Brand : Santec
- Material: Cast iron
- Surface treatment: Painted
- Automation grade: Automatic
Today 'SANTEC' holds a consolidated leadership in the field of SMC/DMC/FRP Melamine Moulding Presses. SANTEC synonymous with “Better – Engineering” Now introduces these high speed presses which operate with high degree of precision extremely safe to operate. The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models pillars type presses are also manufactured depending on customer's requirements.
Additional Information:- Port of Dispatch: All Over World
- Delivery Time: Ready Stock
- Packaging Details: Polythene and Wooden Packing
Downstroking Compression Moulding Press
Approx. Rs 60 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Machine Type: Automatic
- Brand: Santec
Today 'SANTEC' holds a consolidated leadership in the field of SMC/DMC/FRP Melamine Moulding Presses. SANTEC synonymous with “Better – Engineering” Now introduces these high speed presses which operate with high degree of precision & extremely safe to operate. The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models & pillars type presses are also manufactured depending on customer's requirements.
Lab Type Compression Moulding Presses
Approx. Rs 5.5 Lakh / Ton
- Minimum Order Quantity: 1 Ton
- Machine Type: Automatic
- Brand: Santec
The slide moves with 8 – Point gibs with lubrication arrangement special designed square gib construction provides accurate guiding of the moving platen / slide with extra stability to resist any deflection under different load conditions. The structure of the Press is monolithic in many models & pillars type presses are also manufactured depending on customer's requirements.
Vacuum Compression Moulding Presses
Approx. Rs 6 Lakh / Unit
- Automation Grade: Automatic
- Voltage (Volt): 220
- Frame Design: H Type Frame
- Brand: Santec
- Material: Mild Steel
- Type: Moulding Presses
Vacuum compression moulding presses substantially enhance the moulding quality and increase the production capacity. The high efficiency comes from vacuum chamber. Effective degassing due to the vacuum created around the mould reduces heat loss to the surrounding. These presses are also available with die sliding and ejector arrangement and tilting of upper platen for easier access. The mould coming out before opening, making it easy for the operator to remove the finished product/reloading for the next cycle. A Brief How it works Types Technology Applications Benefits Standard Features & Options Available Control Features & Packages Our Range Articles & Resources